Use the options below to filter and sort reviews for Smooth On Inc by specific services, industries, or job function. Summary data is updated as you filter.
Andy Kohm
@ ACME Construction Demo
R & D / Engineering , Medical Device
10/13/2014
They offer such a large selection of products that even though I've used several of them, it is a small percentage of their offerings.
OOMOO Silicon Rubber - This product is great for making molds. Simple, easy to use. Two part solution, mix equal ratios together, pour into your mold form and wait for it to cure. We didn't use a vacuum even though it is recommended for minimizing bubbles. We found that if you are careful with the mixing and pouring not to introduce too much air, the bubbles will rise to the surface and away from the critical areas. (think about this when designing your form as it may save you headaches later). This makes a great flexible mold so you can push out your parts without damage to either the parts or mold. If looking for a rigid mold, then this isn't the product for you.
We had a container for year and went to use it and it was already cured. We might have contaminated the containers or was opened which caused it to cure, so just a heads up that it can happen.
Mold Max STROKE - We used this for looking at some failed products. It was great to be able to brush this onto the part and remove easily once cured. It allowed us to see details of the failure that we were not able to without making an impression of the part.
Strengths: Large selection of molding materials
Quick delivery
Consistant product
Needs to improve: Products do expire. So make sure you don't over order
