Atlas Copco Compressors Inc

We installed a small compressor to supply our R&D lab and modular cleanroom. The system was set-up indoors, next to the CER. It worked well, and supplied all of the capacity that we needed, however, it was a bit loud for our space. We added a couple layers of rubber pads under the feet to keep the vibration out of the concrete slab, but the purge of the tank was always loud and somewhat surprising. Overall, it was a pretty good solution for our application.

Strengths: Small CDA systems

Needs to improve: Could be quieter

We purchased a small, indoor system to supply clean, dry air to our manufacturing CER. The system was fairly quiet, and was overall reliable as long as it received it's regularly scheduled maintenance. When maintenance was missed over the course of 6-9 months, the compressor failed. We have to take the blame, but it was an expensive mistake.

Strengths: Oil-free Air Compressors & Drying Equipment

Needs to improve: none

We purchased one of these small air compressors to provide clean dry air for a temporary clean room. The compressor is nice and quiet and works as advertised and did not impact particle counts.

Strengths: clean air compressors

Needs to improve: none

Good supplier of compressors and air drying equipment for pressurized air supply. They helped to spec the system that best met our needs for CDA for the CER.

Strengths: Air compressors & dryers

Needs to improve: None

they have reliable compressors and air dry equipment that we use all the time

Strengths: compressors

Needs to improve: none