Fondue
Manufacturing
reviews Fondue found useful
Chemicals are shipped quickly and packaged appropriately.
Strengths: Chemicals
Needs to improve: None
They offer on-site and last minute calibration services.
Strengths: Calibration
Needs to improve: None
Manufacturer of robust fluid pumps for in vitro testing
Strengths: wide variety of lab equipment
Needs to improve: none
Metler-Toledo produce top quality scales, but they also charge a top quality price. I highly recommend their product, but I would try to look for used equipment to save some cost.
Strengths: Scale and analytical instruments
Needs to improve: Price
Fondue
Manufacturing , Medical Device
03/12/2014
I've purchased thermocouples, pressure transducers, and power supplies from Omega and have been pleased with the delivery time and product. I haven't had any issues with quality yet.
Strengths: Electrical Test Equipment, Components
Needs to improve: None
I've ordered everything from beakers to hot plates from them and there have been no issues with any products I've received. Definitely recommend them.
Strengths: Lab Supplies and Equipment
Needs to improve: None
They have a showroom filled with different vision systems that you can try out before buying. Their sales team were helpful in narrowing the selection and identifying equipment that would meet our budget and needs.
Strengths: Distributor for various vision system brands
Needs to improve: None
Fondue
Manufacturing , Medical Device
03/12/2014
Some stores carry more than others, just depends on location. Good for picking up routers and smaller electronics. They do have a restocking fee though.
Strengths: Physical storefront and online
Needs to improve: Service varies depending on salesperson and store location
Fondue
Manufacturing , Medical Device
03/12/2014
Since they are a smaller lab, you get a lot more personal attention. They were easy to work with and not too busy to fit us in last minute.
Strengths: Material Analysis (SEM, EDX, etc.,)
Needs to improve: None
Fondue
Manufacturing , Medical Device
03/12/2014
Nothing bad about perusing Amazon first before going anywhere else, especially since they offer 2-day shipping with Prime. Only drawback is the shipping time if you need it now.
Strengths: Wide variety of supplies and vendors, fast shipping
Needs to improve: None
They offer a range of material analysis tests that are helpful during failure analysis or for general prototype characterization. The staff is well-educated in the strengths and limitation of each type of test and can offer help as to choosing which method would be the best for a particular issue.
Strengths: Material Analysis (FTIR, SEM, EDX)
Needs to improve: Cost
I worked directly with the President of Motion Dynamics and it was refreshing to see the head of management intimately involved with their customers. Chris also seemed to genuinely understand our needs and was also the one to follow-up on our inquiry as well. Highly recommended.
Strengths: Precision Springs
Needs to improve: None
Fondue
Manufacturing , Medical Device
03/12/2014
I've used both Nelson and Toxikon to perform biocomp testing. The reason for going between the two is sometimes there are obscure tests that the regulatory body is looking for and only one will perform it while the other doesn't.
Strengths: Biocomp testing per guidance documents
Needs to improve: None
Contacted them to perform biocompatibility testing for an implant and <24 hour circulatory device and all reports were accepted by international and domestic regulatory bodies
Strengths: Biocompatibility Tests
Needs to improve: None
They are a good source for your general lab equipment and supplies. It is easy to order from them and they are quick to ship.
Strengths: Well-stocked with lab supplies
Needs to improve: None
Worked with Wil and Katie at Westpak on multiple occasions and they have always been on time with their delivery date. Highly recommend!
Strengths: Accelerated aging, climatic conditioning, distribution cycle, pouch testing, packaging design
Needs to improve: None
I've had the unfortunate pleasure of performing failure analysis and when our finding was inclusive, we had no other choice but to turn to the experts. They were invaluable to our investigation, but we paid dearly for their services. I guess you get what you pay for!
Strengths: Knowledgeable Staff
Needs to improve: VERY expensive
Capabilities to make custom silicone molds for in vitro test systems; Creative
Strengths: Anatomical molding
Needs to improve: None
Fondue
Manufacturing , Medical Device
03/12/2014
Their staff usually serves on many boards that create the standards the medical industry abides by. As a result, they are well versed in the requirements and guidance documents.
Strengths: Biocompatibility testing
Needs to improve: Cost
Fondue
Manufacturing , Medical Device
03/12/2014
Since they have a physical storefront, I've used them many times when I couldn't wait for items to be shipped to me. They do charge a premium for the products they carry, but when time is not on your side, Lab Pro comes to the rescue. They offer C of Cs for their chemicals, and always greet you with a smile.
Strengths: Physical storefront, laboratory equipment and supplies, certs for chemicals
Needs to improve: Price